WEP 948D-II 3-in-1 90W Hi-Frequency Soldering Desoldering Station Gun Welding

Description

Item is in new condition, however,
desoldering gun driver (the port in the left) is not working
and there is no actual temperature reading for this port.
This is the same port which controls the hi-
frequency
iron.
Regular iron driver (port), regular iron,  hi-frequency iron, desoldering pump and  desoldering gun are tested and works ok.
Tin Gun 3in1 Intelligent Desoldering Soldering Station, Item WEP-948D-II
The WEP-948D-II desoldering soldering station is an upgraded version of our WEP-948D desoldering soldering station and can be used in conjunction with electric soldering irons for a wider range of applications.
Technical Parameters
Power
190W
Power Supply
AC 110V ±10% 60Hz/AC 220V~240V 50Hz
Vacuum Soldering Iron Power
130W
High Frequency Soldering Iron Power
90W
Electric Soldering Iron Power
60W
High Frequency/Electric Soldering Iron Temperature Range
200℃～480℃
Vacuum Soldering Iron Temperature Range
350℃～480℃
Display Types
LED digital display
Temperature Stability
±1℃ (static)
High Frequency Soldering Iron Heating Coil Voltage
AC36V ±10% f=380kHz
Electric Soldering Iron Heating Coil Voltage
AC26V ±10%
Vacuum Pump Power
12W
Vacuum Pump Pressure
0.05MPa
Tip ground impedance
< 2Ω
dimension
L250*W186*H134mm±5mm
Weight
6.1kg
Wire Length
≥120cm
Working Temperature
0～40℃/32℉～104℉
Storage Temperature
-20℃～80℃/-4℉～176℉
Storage Humidity
35%~45%
Features
Programming temperature control technology controlled by a built-in PID controller tracks the temperature of each soldering iron in real-time and corrects the temperature quickly and with minimal tolerance.
Intelligent interchange between the vacuum soldering iron and high frequency soldering iron. If you need to change to high frequency soldering iron, you just simply take off the vacuum soldering iron from the handle and connect it with the high frequency iron and the system will automatically detect and read the previous high frequency soldering iron temperature setting.
The soldering irons are powered by an isolation transformer that will automatically stop if the high frequency soldering iron or vacuum soldering iron is removed.
A password must be given to enter the function parameter settings.
Function parameters can only be changed after the correct password has been entered
thus preventing operator changes and any impact on operational efficiency.
Please note that due to we are upgrading the product now , the soldering iron spare part will differ from this picture.
Pre-sale Attention
the following buyer is responsible for
1.Remote area fee via DHL/FEDEX/TNT, don't want to pay or not answer us, change other shipments
2.Our price is not including the tariff sending from China. If the buyer refuses to pay for the tax fee and cooperate with customs clearance, which agrees that the seller doesn't refund