PACE PRC2000 Rework Station with Accessories includes ALL Handpieces A12

Description

PACE PRC2000 Rework Station with Accessories includes ALL Handpieces
All items are used & tested and in good condition except when new (new-old-stock) as listed below by Pace part number
A12 PRC2000 Kit
7008-0187-P1
PPS-400 Power Supply for the PRC2000 with AC Power Cord
Tested - good condition
Sensatemp Handpieces and included tips & accessories
6993-0238-P1
PS-90 Handpiece with stand (soldering iron)
New-Old Stock - Original Factory Box incl Sodr-Pen with 1121-0414 1/16" Chisel-End Tip, Tool Stand (6019-004), instruction manual, sponge, tweezing multi-tool (yellow grips), Rubber Pad
6010-0077-P1
SX-70 Sodr-X-Tractor Desoldering Handpiece (SensaTemp)
New-Old Stock - Original Factory Box - includes SX-70 handpiece with 1121-0624 Endura ThermoDrive Desoldering Tip (1.02mm), VisiFilter with 1" clear tubing and connector nozzle, 1 pack of 6 (1321-0085-01-P6) Hose Clamps (grey)
1257-0189
Tool Stand - Fits SX-70 or TJ-70
this is the one-piece casting type with black paint, good condition, no chips  - no other accessories with this stand
7023-0002-P1
TJ-70 ThermoJet Convection/ Hot Air Handpiece (SensaTemp)
Suspected NOS/never used - Recommend Burn-in Procedure Before Use
1121-0338-P1
Small, Curved, Single Jet Tip for TJ-70
New in bag
7024-0001-P1
TP-65 ThermoPik (SensaTemp)
Suspect NOS - Recommend Burn-in Procedure Before Use, medium vacuum cup, included tip listed below
1121-0322-001-P1
FlatPack Tip for TP-65 ThermoPik 15.5 x 21.6mm (0.61 x 0.85")
New-old-stock/ out of box
7025-0001-P1
TT-65 ThermoTweez Thermal Tweezer (SensaTemp)
good condition, included tips listed below
1121-0313-P1
Pair TT-65 Chip Removal Tips 2mm (0.08")
NOS, For use with TT-65
1121-0416-P1
Pair Flat Blade Tip 17.8mm (0.7")
NOS, For use with TT-65 or Iron
1121-0473-P1
Pair Flat Blade Tip (12.7mm) Dimensions = 12.7mm (0.5")
NOS, For use with TT-65 or Iron
SMR/ Pulse Heat Handpieces
7013-0004-02-P1
LF-15 LapFlo/ThermoPart Handpiece
good condition, included tips listed below
6000-0009-P1
ThermoPart Coating Removal Tip
condition good
6000-0008-P1
LF-1 Single Point SMD Soldering Tip (this is the tip in handpiece)
condition good
1121-0300-P1
Multipoint SMD Soldering Tip (0.440)
new-old-stock/ never used
7009-0005-P1
ResisTweez Resistance Soldering Tweezer
condition good with 7009-005-P1 new-old-stock (NOS) PACE Guide Block Kit, Tips Listed Below
1121-0301-P1
RT 7 Flat End Resistance Tips (these are the tips in the handpiece)
condition good
7020-0001-P1
CT-15 ConducTweez ConducTweez Conductive Soldering Tweezer
1121-0286-P1
1121-0286-P1
CT-1 Chip Component Tips 0.080" Chisel Set-Left & Right (these are the tips in the handpiece)
condition good
7012-0002-P1
TS-15 Striptweez Handpiece
good condition has the three guide blocks with screws
1121-0960-P1
Thermal Stripper Tips 24 - 18 GA (these are the tips installed in the handpiece)
tips look new
Special Application Handpieces
7027-0001-P1
PV-65 Pik-Vac Vacuum Wand
With new-old-stock 6993-0154-P1 Vacuum Cup Kit, Nozzle and Silicone Hose
7026-0001-P1
MicroChine Miniature Machining Handpiece
condition good, collet for 3/32" bits, NO BITS OR OTHER ACCESSORIES FOR THIS HANDPIECE
Additional Items
7000-0023-P1
Universal Power Cord - for use with SMR/ Pulse Heat Handpieces - LF-15, TW-15, CT-15, TS-15 (all included in this listing, see below)
Used & tested - in good condition
xxxx-xxxx
5-position Redi-Rak (printed part, PETG)
printed part
6008-0115-P1
Foot Pedal
good condition
6993-0138
Tip Maintenance Station
new fiber insert, otherwise "lightly used"
xxxx
Literature/Manuals on CD-ROM (some may be duplicates of paper hardcopy already found in boxing of some items
5050-0251
Tip & Temperature Selection System Charts Booklet (Rev.K)
1257-0186-P1
Tip & Temperature Selection System Chart Holder
65.00 Flat UPS Shipping to continental US.  Please contact me for for other shipping options if desired.