OEM TOYOTA TACOMA TUNDRA SIENNA KEYLESS ENTRY REMOTE FOB TRANSMITTER GQ43VT20T

Description

SFfobsinc.
:FOR SALE:
ONE
OEM
factory TOYOTA
keyless entry remote fob
PLEASE READ!!
BUY OEM REMOTE QUALITY AND ONLY HAVE TO BUY ONCE!!
DON'T BE FOOLED BY THE "
LESS EXPENSIVE
" REPLACEMENTS OR CHINA KNOCK OFF'S
THAT WILL ONLY WORK FOR 2 WEEKS AND DIE ON YOU.
3 BUTTON
LOCK, UNLOCK, PANIC
:WORKS WITH:
2007 2008 2009 2010 2011 2012
TOYOTA HIGHLANDER SPORT
2008 2009 2010 2011 2012 2013 2014 2015 2016
TOYOTA SEQUOIA
TOYOTA TUNDRA
TOYOTA TACOMA
PLEASE SEE COMPATIBILITY FOR FULL LIST
BE SURE YOUR CURRENT REMOTE LOOKS IDENTICAL BEFORE PURCHASE
FCC ID: GQ43VT20T
IC: 1470A-1T
OEM# 89742-02020
PLEASE BE SURE TO MATCH FCC ID AND PART NUMBERS WITH A CURRENT REMOTE. IF YOU ARE UNSURE OF COMPATIBILITY CHECK WITH YOUR LOCAL DEALER BEFORE PURCHASING.
MAY WORK WITH OTHER MODELS AND YEARS.
ALL ITEMS ARE PRE-TESTED WITH A WORKING BATTERY INSTALLED
:PROGRAMMING:
PROGRAM INSTRUCTIONS ARE AVAILABLE FOR MOST YEARS LISTED.
NOT ALL WILL HAVE SELF PROGRAMMING
VISIT
WWW.PROGRAMYOURREMOTE.COM
SELF PROGRAMMING MAY BE RESEARCHED ONLINE.
:PAYMENT:
PLEASE MAKE ARRANGEMENTS TO PAY FOR THE ITEM WITHIN 2 DAYS OF AUCTIONS END
:WARRANTY:
ALL TRANSMITTERS CARRY A STANDARD 30 DAY WARRANTY.
WARRANTY'S WILL COME IN THE FORM OF A REFUND OR REPLACEMENT.
:SHIPPING:
ALL ITEMS ARE SHIPPED WITHIN 1 BUSINESS DAYS OF RECEIPT OF PAYMENT.
ITEMS WILL BE SHIPPED USPS FIRST CLASS MAIL WITH DELIVERY CONFIRMATION.
ANY QUESTIONS PLEASE EMAIL THROUGH EBAY
THANK YOU
TOYOTA REMOTE PROGRAMMING T20T
Obtain all remote transmitters for this vehicle.
1. Start with the key out of the ignition, drivers door is open, all other doors and trunk closed and drivers door is unlocked.
2. Perform these steps within 5 seconds. A. Insert the key into the ignition (Do NOT Turn it) and Pull key out. B. Insert the key into the ignition (Do NOT Turn it) and Pull key out.
3. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into the ignition (Do NOT Turn it) and Pull key out.
4. Perform these steps within 40 seconds. A. Close then open the drivers door. B. Close then open the drivers door. C. Insert the key into ignition and leave it in the ignition. D. Close the drivers door. E. Turn the ignition to ON (Do NOT Start or crank engine) then back to OFF. F. Remove the key from the ignition.
5. Within 3 seconds, the power door locks should lock then unlock automatically indicating successful entry into programming mode. Return to step 1 if the door locks do not cycle at this point.
6. Perform these steps within 40 seconds. A. Press the lock and unlock buttons on the remote simultaneously for 1.5 seconds. B. Immediately after letting go of the lock and unlock buttons, Press the lock button by itself and hold for 2 seconds. Within 3 seconds, the door locks should lock and then unlock once indicating successful programming. If the door locks cycle twice, repeat steps A and B in step 6 as the remote was not accepted. C. Repeat steps A and B in step 6 for each new remote.