OEM CHRYSLER DODGE DUAL POWER DOOR KEYLESS REMOTE FOB TRANSMITTER GQ43VT18T

Description

SFfobsinc.
:FOR SALE:
ONE GREAT CONDITION
factory
DODGE CHRYSLER
OEM
keyless entry remote
NO CRACKED OR CHIPPED CASE AND NO WORN OFF BUTTONS
REMOTE HAS BEEN TESTED AND IS IN 100% WORKING ORDER
FCC ID: GQ43VT18T
P/N: 04686797
:
COMPATIBILITY:
2001 2002 2003
CHRYSLER TOWN & COUNTRY
DODGE CARAVAN
DODGE GRAND CARAVAN
ALL MODELS WITH DUAL POWER DOORS
MAY WORK WITH OTHER MODELS AND YEARS. BE SURE TO CHECK WITH YOUR LOCAL DEALER BEFORE BIDDING
:PROGRAMMING:
FREE PROGRAM INSTRUCTIONS ARE INCLUDED AT THE BOTTOM OF PAGE
YOU MUST HAVE ONE WORKING FACTORY KEYLESS REMOTE FOB FOR THESE INSTRUCTIONS TO WORK, WITHOUT IT YOU WILL NEED TO HAVE THE REMOTE PROGRAMMED AT YOUR LOCAL CHRYSLER/DODGE/JEEP DEALERSHIP
:PAYMENT:
PLEASE MAKE ARRANGEMENTS TO PAY FOR THE ITEM WITHIN 3 DAYS OF AUCTIONS END
:WARRANTY:
ALL TRANSMITTERS CARRY A STANDARD 30 DAY WARRANTY. WARRANTY'S WILL COME IN THE FORM OF A REFUND OR REPLACEMENT.
:SHIPPING:
ALL ITEMS ARE SHIPPED WITHIN 2 BUSINESS DAYS OF RECEIPT OF PAYMENT. ITEMS WILL BE SHIPPED USPS FIRST CLASS MAIL WITH DELIVERY CONFIRMATION.
ANY QUESTIONS PLEASE EMAIL THROUGH EBAY
THANK YOU
ATTENTION:
You
MUST HAVE
one working remote to add one more to the system.
If you do not have one working remote right now then these instructions will not work.
You will have to have a Locksmith or dealership use a computer to program the first
remote for you.
1.  Press LOCK button 5 times at 2 second intervals to resynchronize remote.
2.  Insert key into the ignition switch. Turn ignition to the RUN position (as far as you can
go without cranking engine). Wait for ignition chimes to stop.
3. Using the working remote, press and hold the UNLOCK button on the remote for 4 to 10
seconds.
4. Within the specified 4 to 10 seconds, continue pressing the UNLOCK button and then
press the
PANIC
button ( on the programmed remote ) for 1 second and release both
buttons. A chime will sound to indicate that the remote programming mode has been
entered ( allow 3 seconds for chime to sound ).
5. Within 30 seconds of the chime, press and release the LOCK and UNLOCK buttons
simultaneously then press and release just the UNLOCK button on the same remote.
A chime will sound indicating the remote has been programmed. Press and release
the LOCK and UNLOCK buttons simultaneously and then press the UNLOCK button on
each new remote you wish to program at this time. A chime will sound after each
additional remote is programmed.
6. Turn the ignition OFF and remove key.
7. Test Remotes.