Hakko - # C5016 - Bottom heater for FR-811 SMD hot air rework system

Description

Hakko - # C5016 - Bottom heater that integrates with the HAKKO FR-811 SMD hot air rework system
The HAKKO C5016 bottom heater integrates and is fully controlled by the HAKKO FR-811 SMD hot air rework system with the execution of the user programmable rework profiles that are stored on the HAKKO FR-811.
The heater can be operated in power or thermocouple mode, including the ability to monitor/control the ramp rate of the assembly.
NOTE:
The HAKKO C5016 must be used with the FR-811. It will not work on its own or with any other units.
SPECIFICATIONS
Part Number
C5016
Input Voltage
120 VAC 50/60 Hz
Power Consumption
730W
Effective Heater Area
7.5 x 3.2 in. (190 x 80 mm)
Board Capacity
9.8 x 5.5 in. (248 x 140 mm)
Heating Zones
2
Operating Modes
Power / Thermocouple
T/C Range
122-482°F (50-250°C)
T/C Stability
±9°F / ±5°C
Power Range
1 - 100% (1% increments)
Heater Control
Requires FR-811
Heater Type
High Efficiency Carbon Filament
Heater Lamp MTBF
~ 2100 hours
External Connections†
4-pin DIN for FR-811 ONLY
Dimensions (W x H x D)
11.6 x 2.6 x 9.7 in.
295 x 66 x 246 mm
Weight
4.6 lb. (2.1 kg)
ESD Safe
Yes
Safety Certification
cMETus
Safety Approval
† Unit is completely controlled by the HAKKO FR-811 SMD Rework System. Requires connecting cable (included)
CONTENTS
Part Number
Description
--
C5016 Bottom Heater
B2419
Power Cord
--
Connecting Cable