FEITA 858D Hot Air Gun SMD Digital Rework Station Digital Soldering Stations Kit

Description

√ Hot Air Soldering Station Zero-crossing triggering temperature control of microcomputer; Auto-cooling function, high-quality heating materials, long service life.
√ High power, rapid rise of temperature, high and stable temperature;LED digital display, when the temperature is less than 70 degree, can stop rotation automatically.
√ Adjust the air flow and temperature control keypad. Large and soft air flow via handle of rework station, air flow can be modulated via the knob.
√ Brushless fan with soft air; Noise: Less than 45dB, has a long life span and little noise; Safely remove BAG- IC,keep pins intact.
√ Soldering rework station operating voltage: 110V; Output Power:700W; Air flow: Max. 120L/min; Component Length of Handle: ≦120cm.
Product description
Operation Instruction:
1. To put the unsoldering equipment ready, and leave handle on the holder, connect the power, set the blast nozzle(large caliber nozzle preferred).
2. To switch on the power, the screen display"-",it represents standby model (Available in microcomputer with digital LED)
3. To press▲or▼ button (revolving switch )as to set up the temperature. (Available in microcomputer with digital LED)
4. To turn the temperature switch as to set up the required temperature. (Available in luminous discharge tube display indication)
5. To hold the handle, so the equipment begin to heat. To adjust the revolving switch of airflow in order to select suitable airflow, and begin to operate normally while the temperature is table.
6. To put back the handle on the holder after the work; meanwhile,the unsoldering equipment switch from heating mode to cooling heating element mode automatically. while the temperature is lower than 100C,the screen displays"-", it stands for switching to standby mode,and after the temperature of heating element is less than 70C,the equipment is on standby.
7. To switch off the power unplug if there is no operation for a long period of time.
Application:
1.Soldering and de-soldering the most of the SMD component, such as SOIC, CHIP, QFP, PLCC, BAG and so on
2.De-solder different shielding boxes or shielding covers conveniently. Make heat shrinkage for the heat-shrink tube and the PVC tube
3.Warm-up the mini-type metal and the mechanism, relax firm components
Package Include:
1x FEITA 858D SMD Hot Air Rework Station
1x Hot air gun handle
1x Handle holder
3x Nozzles(5mm,8mm,10mm)
1x User guide