100% OEM CHRYSLER DODGE JEEP KEYLESS REMOTE FOB TRANSMITTER GQ43VT17T 04602260

Description

SFfobsinc.
:FOR SALE:
ONE
GREAT CONDITION
100% OEM
factory CHRYSLER DODGE JEEP
keyless entry remote
NO CRACKED OR CHIPPED CASE
NO WORN OFF BUTTONS
REMOTE HAS BEEN TESTED AND IS IN 100% WORKING ORDER
FCC ID: GQ43VT17T
P/N: 04602260
:WORKS WITH:
2002 2003 2004
JEEP LIBERTY
2001 2002 2003 2004
CHRYSLER 300M
CHRYSLER CONCORDE
INTREPID
2001 2002 2003 2004 2005 2006
STRATUS
CHRYSLER SEBRING
2003 2004 2005 2006 2008
DODGE VIPER
BE SURE YOUR CURRENT REMOTE LOOKS IDENTICAL BEFORE PURCHASE
MAY WORK WITH OTHER MODELS AND YEARS.
BE SURE TO CHECK WITH YOUR LOCAL DEALER BEFORE BIDDING
PLEASE BE SURE TO MATCH FCC ID AND PART NUMBERS WITH A CURRENT REMOTE. IF YOU ARE UNSURE OF COMPATIBILITY CHECK WITH YOUR LOCAL DEALER BEFORE PURCHASING.
MAY WORK WITH OTHER MODELS AND YEARS.
:PROGRAMMING:
FREE PROGRAM INSTRUCTIONS ARE POSTED AT BOTTOM OF PAGE
YOU MUST HAVE ONE WORKING FACTORY KEYLESS REMOTE FOB FOR THESE INSTRUCTIONS TO WORK, WITHOUT IT YOU WILL NEED TO HAVE THE REMOTE PROGRAMMED AT YOUR LOCAL CHRYSLER/DODGE/JEEP DEALERSHIP
:PAYMENT:
PLEASE MAKE ARRANGEMENTS TO PAY FOR THE ITEM WITHIN 2 DAYS OF AUCTIONS END
:WARRANTY:
ALL TRANSMITTERS CARRY A STANDARD 30 DAY WARRANTY.
WARRANTY'S WILL COME IN THE FORM OF A REFUND OR REPLACEMENT.
:SHIPPING:
ALL ITEMS ARE SHIPPED WITHIN 1 BUSINESS DAYS OF RECEIPT OF PAYMENT.
ITEMS WILL BE SHIPPED USPS FIRST CLASS MAIL WITH DELIVERY CONFIRMATION.
ANY QUESTIONS PLEASE EMAIL THROUGH EBAY
THANK YOU
YOU MUST HAVE A WORKING REMOTE FOR THIS PROCEDURE TO WORK. IF YOU DON'T HAVE A WORKING REMOTE THEN YOU MUST HAVE A REMOTE PROGRAMMED BY A DEALER OR LOCKSMITH USING DIAGNOSTIC EQUIPMENT.
PLEASE READ ENTIRE PROCEDURE BEFORE PERFORMING. SOME VEHICLES MAY USE ONE OF TWO PROCEDURES. IF PROCEDURE 1. DOES NOT WORK THEN PLEASE USE PROCEDURE 2.
Programming procedure #1.
Obtain all remote transmitters for this vehicle.
1. Put key in ignition and turn ignition switch to ON position (as far as you can turn key without cranking engine).
2. Press and hold UNLOCK on a currently functioning remote for 4 to 10 seconds.
3. While holding the UNLOCK button during the 4 to 10 second period, press the panic button for one second and release both buttons at the same time. A chime should sound within three seconds to indicate the vehicle has entered programming mode.
4. Press any button on the remote used in step 3. You should hear an audible tone indicating that remote has been re-programmed. This step must be done within 30 seconds of hearing first chime in step 3.
5. Within 30 seconds of completiong step 4. press any button on the next remote. Repeat step 5. for all additional remotes including working remotes.
6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.
Programming Procedure #2
Obtain all remote transmitters for this vehicle.
1. Put key in ignition and turn ignition switch to ON position (as far as you can turn key without cranking engine).
2. Press and hold UNLOCK on a currently functioning remote for 4 to 10 seconds.
3. While holding the UNLOCK button during the 4 to 10 second period, press the panic button for one second and release both buttons at the same time. A chime should sound within three seconds to indicate the vehicle has entered programming mode.
4. Press the LOCK and UNLOCK buttons simultaneously on the same remote used in step 3. then release. You should hear an audible tone indicating that the remote was recognized. Once tone is heard press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. This must be done within 30 seconds of step 3.
5. Within 30 seconds of completing step 4. press the LOCK and UNLOCK button on the next remote then release. You should hear an audible tone indicating that the remote was recognized. Once tone is heard press and release the UNLOCK button on that remote. A chime should sound indicating that the remote has been programmed. Repeat step 5. for all additional remotes including working remotes.
6. Programming is now complete. Turn ignition off and test remotes to ensure proper programming.